Forklift Warehouse Safety Halo System. SHRL-R30. Rectangle, 30 watt.
Red Danger Zone Warning Light, for Forklift Material & Handling
Side Warning Light - No Go Zone.....
Small Compact Unit to fit into the Tight Area's
This light has many applications and creates a safe work environment in the warehouse and also night construction work.
Also Available in Blue - On request.
Developed by Ultimate LED Australia.Our Lights are the brightest Red Safety Halo light on the market.We have been involved in the new safety warehouse lights for over 6 years and we are the first to introduce theses lights into the Australia Market.We have a wide range of warehouse safety lights.Red triggers a safety switch in our minds.There is no maintenance once the system is installedRing us for our expert advise.
Ultimate LED's Series LED Pedestrian Warehouse Workplace Safety Halo Lights are designed specifically for material handling applications to provide a visual warning for pedestrians in the vicinity of mobile equipment.
These lights are intended as a supplemental safety device in addition to a 360º warning light and project a red, 180 lumen line beam onto the ground either side of the vehicle.This additional safety feature is especially useful where blind corners are present (i.e. warehouse racking) and is likely to be seen by pedestrians that are not looking up or paying close attention to their surroundings. Featuring 9-80V DC operation, an aluminium housing and polycarbonate lens the SHRL-30 is extremely resistant to impact and vibration damage and has an IP68 ingress protection rating.This light has many applications. Create No Go Zones in your work place, NO more painting the floor. Mounted in production line areas, Loading Bays, Danger Areas, Conveyer belt areas ETC. Big saving on maintenance costs. Fit and Forget.You will require 3 lights to create a 3/4 Safety Halo.Pricing is per light. Optional Mounting Brackets Available, No Welding or DrillingTalk to us so we can quote on your requirements.This is a warehouse light system.
Your Forklift Company only supply the basics of lights to sell you the forklift
We have a wide range of quality lights to upgrade your machine to increase the safety in your workplace
|Number of LED's||Quality 6 x 5 Watt Cree LED's|
|Light Output||2775lm (Red Line Beam)|
|Input Voltage||10-80 Volt DC|
2.2Amps @ 12 Volt DC 0.6Amps @ 48 Volt DC
|IP Rating||IP68 Water & Dust Proof|
|Vibration Rating||Vibration Resistant 7g|
|Housing Construction||Die Cast Aluminium|
|Dimensions||150 x 60 x 60mm|
|Wiring||500mm Sheathed Cable|
|Operation Temperature||-40 to +65 Degree C|
ECC (ECE R10)
What is the purpose of the Red Zone Danger Area Warning Light
40% of all forklift accidents involves a pedestrian. Ensure pedestrians stay a safe distance away from the forklift with the Red Zone Warning Light. The Red Zone puts a bright red line on the floor, near the forklift, to show pedestrians where they are not allowed. This zone can also be called the SAFETY HALO zone and can be adjusted to the distance of your choice. The Red Zone (Safety Halo Zone) helps prevent foot injuries and collisions from rear end swing, as well as showing the NO Go Zone around any piece of mobile equipment. Each company can set their own NO Go Zone or SAFETY HALO ZONE distance. A standard distance is 1 metre but you can increase this at your requirements. This light is easily installed by an Auto Electrician into your ignition system. The light will activate every time the ignition of the machine is turned on. It has a low power draw, no extra heavy duty wiring required..
What Type of forklifts can the Red Zone be used on?
The Red SAFETY HALO lights were designed for any forklift used primarily indoors. They can be used on any type of forklift including sit downs, stand ups, tuggers and more. The Red Safety Halo lights can be used on fuel, gas and electric forklifts etc. While the Red Zone lights are weatherproof and can be taken outside, they are not bright enough to be effective outside on sunny days. They will be more effective outside during dust, dawn and night times. This light is not UL rated for hazard area's. The Red Zone Light can be combined with other warning lights on your machine.
We can obtain a Safety box for you to incorporate this light for your hazardous area's
Mounting brackets are available, no welding or drilling into the operators safety cage. Easy to install.
We are passionate about workplace safety and the quality of our lights that we supply.
Give us a call if you require any more information.
Below are the available bulk discount rates for each individual item when you purchase a certain amount
All prices are in AUD.